Latest Release Page 31
AMCAD, a leading innovator in microwave component measurement and design solutions, has developed IQSTAR—a groundbreaking software solution that addresses the complex challenges faced by companies in the production testing of RF/microwave components and circuits. In collaboration with strategic partner Maury Microwave, AMCAD offers a comprehensive suite of services and solutions, ensuring optimal design performance and reducing time-to-market for clients. The demand to bring cutting-edge developments to market quickly, while demonstrating the superior quality of products, has posed a significant challenge for many companies. Furthermore, customers are increasingly seeking detailed application-specific data beyond traditional small-signal measurements and frequency swept S-parameters. To address these evolving needs, AMCAD Engineering has developed IQSTAR. This turnkey software solution features a versatile and customizable schematic editor...
EMTP-RV 4.3.3 is a specific version of the EMTP (Electromagnetic Transients Program) software, also known as EMTP-RV or EMTPWorks, designed for advanced simulation and analysis of power system transients. It is widely used for studying electromagnetic, electromechanical, and control system transients in multiphase electric power systems. However, there is limited specific information available in the provided references about version 4.3.3 itself. Below is a consolidated overview based on the available data about EMTP-RV and its versions close to 4.3.3: Key Features of EMTP-RV (Relevant to Version 4.3.3) Purpose: EMTP-RV is a sophisticated tool for simulating transients in power systems, covering electromagnetic and electromechanical oscillations ranging from microseconds to minutes. It is used by major power system industry players like EDF,...
PICS3D, Photonic Integrated Circuit Simulator in 3D, is a state of the art 3D-simulator for surface and edge emission laser diodes, SOA, and other similar active waveguide devices. The 2D/3D semiconductor equations (drift-diffusion, Poisson, etc..) are coupled to the optical modes in both lateral and longitudinal directions. Optical properties such as quantum well/wire/dot optical gain and spontaneous emission rates are computed self-consistently. Starting from the 2016 version, the functionality of our 2D laser solver (LASTIP) has also been folded into PICS3D: this allows for easy simulation of laser devices without significant longitudinal effects and more flexibility for customers working on a variety of laser device designs. Physical model – Deep level defects and defect dynamics – AC analysis model –...
OptiSystem 2024, OptiSystem is an optical communication system simulation package for designing, testing, and optimizing virtually any type of optical link in the physical layer of a broad spectrum of optical networks, from analog video broadcasting systems to intercontinental backbones. A system-level simulator based on the realistic modeling of fiber-optic communication systems, OptiSystem possesses a powerful simulation environment and a truly hierarchical definition of components and systems. Its capabilities can be easily expanded with the addition of user components and seamless interfaces to a range of widely used tools. OptiSystem is compatible with Optiwave’s OptiSPICE, OptiInstrument, OptiGrating, and OptiBPM design tools. Key Features of OptiSystem 2024 OptiSystem 2024 introduces advanced tools and components to streamline optical network design and simulation,...
CivilGEO GeoHECRAS , developed by CivilGEO, is a civil engineering software that enhances the U.S. Army Corps of Engineers’ HEC-RAS program with an interactive 2D/3D graphical user interface. Released on July 7, 2022, it integrates with AutoCAD, Bentley MicroStation, and ESRI ArcGIS, streamlining workflows for hydraulic modeling, floodplain mapping, and infrastructure design. Key features include: Enhanced Modeling: Supports 1D and 2D steady and unsteady flow computations, bridge and culvert design, flood inundation mapping, and river restoration. It pulls data from various sources like CAD files, GIS data, and digital elevation models (DEMs) for rapid HEC-RAS model creation. Visualization: Offers 2D/3D visualization with georeferenced maps (e.g., Google Maps, Bing Maps), allowing users to layer FEMA flood maps or export to Google...
HxGN MinePlan 2024 is a comprehensive mine planning software suite developed by Hexagon’s Mining division, designed to support geologists and engineers in creating detailed 3D geological models and optimizing mine operations from exploration to production. Below is an overview of its key features, updates, and enhancements based on the latest available information: Key Features of HxGN MinePlan 2024 Block Model Manager 2.0 (Release 2, 2024): Enhanced Security and Control: Introduces an identity management module integrated with Windows user accounts, streamlining access permissions based on roles to ensure only authorized users can view or modify block models. Audit Trail and Version Control: Allows tracking of changes to block models, enabling users to trace errors and revert to previous versions for greater...
AVEVA PRO/II Simulation 2025 is a steady-state process simulator designed to optimize plant performance through advanced process design, operational analysis, and engineering studies. It performs rigorous heat and material balance calculations for a wide range of chemical processes, offering a comprehensive library of components, thermodynamic models, and unit operations. The software supports industries such as oil and gas, refining, petrochemicals, chemicals, pharmaceuticals, and polymers. Key Features: Thermodynamic Models: Extensive range for accurate modeling across industries. Integration: Seamlessly integrates with Microsoft Excel for custom modeling and reporting, and with industry-standard licensors like HTRI, OLI, Koch-Glitsch, and Cost Engineering. It also supports assay imports via AVEVA Unified Supply Chain. Cloud and On-Premise Access: Available with secure user access control, simplified maintenance, and...
LUSAS is the trading name of Finite Element Analysis Ltd., – an expanding UK-based specialist engineering analysis software developer. Software products, based on the LUSAS finite element system, provide accurate solutions for all types of linear and nonlinear stress, dynamic, and thermal / field analysis problems. Key features include: Finite Element Analysis: Provides accurate solutions for complex structural problems, including 2D/3D analysis, linear/nonlinear loading, and geotechnical studies. Comprehensive Guide: Includes a built-in manual for structural analysis topics, aiding students and researchers. Industry Applications: Supports analysis of bridges (pillar, floating, concrete, cable-stayed), building structures, factories, and more.
AVEVA Dynamic Simulation 2025 is a comprehensive, dynamic process simulator designed to address the challenges of designing, commissioning, controlling, and operating modern process plants safely and profitably. It supports process design, control system validation, operator training, and performance improvement across industries like oil and gas, chemicals, power, and more. New Features in AVEVA Dynamic Simulation 2025 – Infrastructure Enhancements is a 9-minute recording that provides an overview of the new features available in AVEVA Dynamic Simulation version 2025. This eLearning assumes familiarity with previous AVEVA Dynamic Simulation versions. The new features are outlined via MS-PowerPoint slides along with software demonstrations. This recording will be of value to those looking to gain an understanding of the new features related to infrastructure...
Schlumberger Flaresim 2024 is an advanced flare simulation and design software used primarily in the oil, gas, and petrochemical industries. It is the industry-standard tool for modeling thermal radiation, noise footprints, and gas dispersion generated by flare systems in offshore platforms, gas plants, refineries, and chemical plants. The software predicts the temperature of exposed surfaces and supports complex flare system configurations, including multiple flare tips on vertical, horizontal, or inclined stacks. It uses various algorithms to model pipe flares, sonic flares, and liquid burners, allowing users to input and report data in customizable units. Key features include: Thermal Radiation and Gas Dispersion Modeling: Simulates thermal radiation and gas dispersion under different environmental conditions, aiding in safety and compliance. Comprehensive Configurations:...
BioWin 6.3: Advanced Wastewater Treatment Simulation Software Overview BioWin 6.3, developed by EnviroSim, is a premier wastewater treatment process simulator used globally for designing, analyzing, and optimizing wastewater treatment plants (WWTPs). This Microsoft Windows-based software integrates biological, chemical, and physical process models to deliver comprehensive plant-wide simulations, ensuring cost-effective designs and regulatory compliance. Key Features Advanced Biological Modeling: Simulates microbial activity, nutrient removal, and EBPR with precise influent VFA characterization. Chemical and Physical Processes: Models pH, oxygen transfer, and gas-liquid interactions with new precipitate variables (calcium carbonate, calcium hydroxide, magnesium hydroxide). Enhanced MBR and N2O Modeling: Includes flat plate MBR elements and advanced nitrous oxide modeling with N2O reduction. User-Friendly Design: Features updated flowsheet visuals, customizable settings, and pre-configured layouts...
DownStream’s CAM350 is a powerful and easy-to-use solution to help engineers check Gerber. It enhances DFM inspection of pcb designs, prepares data for PCB manufacturing, and ensures an optimal manufacturing process. In addition to CAM350, there is also a good use of BluePrint-PCB, you can use Microsoft Office like the operation of the way to quickly output contains PCB manufacturing, organization, etc., the need for electronic smart documents, the smart document can also be connected to include sound, images, external files, web pages …… The smart document can also be hyperlinked to audio, video, external documents, web pages, , etc. Shared here is the February 24, 2025 release of CAM350 v15.1 and BluePrint v7.1, a new upgrade that adds the...
IDEA StatiCa 25.0, released on April 24, 2025, is a structural engineering software focused on designing and code-checking steel connections, concrete details, and other structural elements. Here’s a concise overview based on available information: Key Features and Improvements Anchoring Design: Enhanced capabilities for anchoring to concrete, including cast-in plates, column pedestals, and general foundation shapes. Supports ACI 318-19, Australian codes, and Chinese GB standards for anchoring checks. Calculation of 3D tasks is up to 4x faster. Checkbot Upgrades: Handles large projects with up to 1,000 nodes, featuring bulk workflows, automatic connection grouping, and critical load effect filtering. Generate detailed or summary reports in one click. Connection Wizard: Over 200 parametric templates for steel connections, allowing quick, code-checked designs with real-time...
UcamX v2024 is Ucamco’s latest CAM software suite designed for pre-production engineering in the electronics manufacturing industry, specifically for optimizing PCB layouts for manufacturing. It succeeds the older Ucam software and is known for zero-defect tooling, accepting various PCB data formats and generating production-ready data. The latest release, UcamX v2024.11, was announced on February 27, 2025, alongside Integr8tor Nexus v2024.11. Key Features of UcamX v2024 64-bit Core and Parallel Processing: Utilizes a 64-bit engine for handling high-layer-count jobs and large datasets, with parallel processing to split CPU-intensive tasks across multiple cores for faster performance. YELO (Yield Enhancing Layout Optimizer): Includes tools like: Copper Adjuster: Automatically optimizes annular rings, copper-to-copper, and copper-to-drill clearances using AI-driven techniques. Mask and Legend Adjusters: Enhances...
Geomagic Wrap provides the easiest-to-use, affordable, fastest and most accurate way to go from point clouds to 3D polygonal models. Geomagic Wrap 2024 crack download allows you to convert point cloud and sensor data into 3D polygon meshes for use in manufacturing, engineering, entertainment, archaeology, and analysis. Intelligent, automated and flexible, Geomagic Wrap provides best practice and highest quality 3D data from scan data with high accuracy and productivity. – Very fast creation of 3D models for further uses such as 3D printing, archiving and transfer to visual effects, rendering and for application in other systems. – Improved editing, navigation and visualization of point clouds derived from mid-range and long-range scanners to create real three-dimensional models improves data understanding and...
Spectronaut is a Data Acquisition for Independent Analysis (DIA) proteomics experiment designed to. 1. Building hybrid libraries By combining large-scale spectral libraries from other sources (project or resource libraries) with DIA data from the samples themselves (directDIA), it is possible to obtain large quantitative protein counts without having to build the libraries yourself. 2. Labeling Workflow With Biognosys’ new PQ500 Isotope Labeled Peptide Kit, target proteins can be quantified absolutely and across 5 orders of magnitude by off-label quantification. 3. Host Cell Proteins Low-abundance host cell proteins can be characterized and quantified with high precision by correcting for residual proteins.
